2 Answers. Try connecting the TV to a different source (e.g. change HDMI ports.) to identify whether the issue is with the TV or the source. Power cycle both the TV and the source. Make sure to unplug the TV and the source from the power point, wait at least one minute before plugging and turning them back On.

A double image, sometimes called a ghost image, usually occurs when there is signal interference. If your TV is connected directly to your wall outlet: Ensure that your coax cable is securely connected to your TV and the wall outlet.

Adjust your set’s convergence to fix a double picture. Projection television monitors may display a double picture along the vertical or horizontal. TV repair experts may charge hefty fees for fixing this problem, but most users can fix it themselves by adjusting the television monitor’s convergence.

1. To switch to full screen, select one of the Multi View screens and press the select button.
2. To return to the previous multi screen, press and hold Back key on your remote.
3. To finish the Multi View completely, press and hold Back key on your remote while you have a focus either side.

If you experience a TV showing colored vertical lines, try gently tapping in different areas on the back of the TV, you may see the vertical colored lines go away completely or they might decrease in intensity. If so, you may simply have a loose wiring cable.

When an LED or LCD TV shows damage to a vertical line, a flat cable that is not properly connected to the T-Con board can be the cause of the damage, even to check it you can try tapping on the back of the lower TV. become normal.

Press the Menu button on your remote. Select Picture. Select Screen Adjustment. From here you can adjust aspect ratio, screen fit, and screen position.

It is worth it to repair your TV if the cost of the repair is significantly cheaper than the cost of buying a new TV. The most expensive repair for a flat-screen TV is usually a cracked screen — this repair tends to cost more than a replacement TV for all but the largest screen sizes.

For the most common problems, TV repair pricing might range between $175 and $200 on average.

A blurry image on a high-definition LCD TV is typically the result of a mismatch between the TV’s resolution capabilities and the resolution of the signal that is coming from connected devices, such as a DVD player or satellite TV receiver.

Troubleshoot a Fuzzy or Blurry Picture on Your TV

1. Make sure your picture isn’t stretched. Play with the settings of your TV to ensure that the picture you’re seeing isn’t being stretched.
2. Mess with your TV’s different sharpness and picture modes.
3. Reduce the noise.
4. Swap out your cables.
5. Unplug.
6. Move it around.

Press the Home Button on your Samsung Smart Control, to access the Home Screen.

1. b). Using the Directional pad on your remote, navigate to and select Settings.
2. c). Select Picture.
3. d). Select Expert Settings.
4. e). Using the Down Directional button, scroll down the list until you reach HDMI UHD Color.
5. f).
6. g).
7. h).
8. i).

The most common reason for your 4k looks fuzzy is because you are upscaling 1080p content onto a 2160p panel. This process forces the original resolution to stretch for fitting onto the high resolution. Results the low-resolution content gets fuzzy or blurry even in a 4k TV.

To pass 4K content, the port, cable, and source need to be compliant with a protocol called HDCP 2.2. If your TV won’t display 4K content, it’s possible you’re plugging into an incompatible port. Try another one or check the manual on your TV to see which ports you should be using for UHD.

Without 4K content, a 4K TV can’t look its best. Your old DVD collection along with most HD cable and satellite channels are going to look soft. This is because compared to the ultra-high resolution of your new TV, they are.

Change Motion smoothing settings on your TV

1. Navigate to Settings > Picture > Expert Settings > Auto Motion Plus Settings (Picture Clarity Settings).
2. The default setting is Auto.
3. Select Auto Motion Plus (Picture Clarity) to change the setting to either Off or Custom.