Summary. It is possible for one person to use a ceiling hoist thanks to single-user hoist systems. Thanks to innovative equipment and hoist track components, you can move patients around by yourself and give them your full attention without having to worry about manual tasks.

never use a hoist that they have not been trained to use. always ensure that the right hoist is being used for the job — if in doubt, staff should be trained not to use the hoist but to reassess the handling operation. never exceed the safe working load of the hoist.

LOLER Inspections These are a legal requirement and should be carried out by a competent person.

Single-user ceiling hoist systems are available, which make it much easier for one person to hoist patients or loved ones without the requirement for a second person. Single-user hoists can include turntables, track components and sensors which make it possible for one person to use an overhead hoist system safely.

Avoid such activities wherever possible. Reduce moving distances wherever possible….We also recommend you DON’T:

1. Lift loads that you struggle to manage.
2. Move loads up or down stairs.
3. Move loads long distances.
4. Handle objects in a small working space, which may cause you to twist or stoop.

Manual Handling in Care Homes: Using Hoists Safely For example, hoists can be used in care homes to raise people that have fallen, help them to stand, help them to move, lift them into and out of bed or into or out of the bath.

Here is our guide on what to check before using a ceiling track hoist to make sure your system is in tip-top condition.

• 1) HAVE YOU HAD TRAINING?
• 2) IS THE HOIST IN GOOD WORKING ORDER?
• 3) IS THE HOIST UNIT MOVING?
• 4) HOW DOES THE SLING LOOK?
• 5) DOES THE PERSON MIND BEING HOISTED?
• Summary.

Check 1 – Check the hoist has been serviced in the last 6 months. The first thing to check is the service label and if it is in date. This is for hoists, slings, and any accessories. Your ceiling track hoist system, mobile hoists, and any accessories should be serviced once a year and LOLER tested every six months.

PRE-OPERATIONAL SAFETY CHECKS Ensure the vehicle hoist has operating and maintenance instructions permanently located and clearly visible. Check the capacity of the hoist compared to the weight of the vehicle. If vehicle is too heavy, do not proceed. Ensure the area is clean and clear of grease, oil.

or in a position where they might be at risk of falling from the bed or chair. surfaces, transporting an individual over a long distance on a hoist, or not following manufacturer’s instructions for use or safe systems of work. sling specified for the individual has one).

five

A toileting sling is one of the more common sling shapes and is specifically designed to facilitate the toileting process. Despite being very easy to fit, toileting slings should never be considered general-purpose slings and they will not be suitable and/or safe for many patients.

The four main types of slings are:

• Wire Rope: The most commonly used sling.
• Chain: Combines superior strength, ease of handling and durability.
• Mesh: Wire and Chain.
• Synthetic: Both web and round-slings are used where loads must be protected from damage.

There are three main types of lifting slings that you can choose: chain slings, wire rope slings, and polyester slings.

It is important you wear your sling in bed for the recommended period, unless you are instructed otherwise. We recommend you sleep on your back or unaffected side. When lying on your back we suggest you use a pillow underneath your injured arm for support.

The Different Types of Patient Slings

• Universal Sling. The Universal Sling is designed to fulfil a variety of roles and offers a more general solution to patient lifting needs.
• Hammock Sling. A hammock sling is designed specifically for comfort.
• Patient Handling Sling.

9) – A synthetic web sling shall be removed from service if conditions such as the following are present: Missing or illegible sling identification. Acid or caustic burns. Melting or charring of any part of the sling.

The Universal Sling CA300 is an extremely versatile sling used for general transfers. The Universal Sling is available in a wide range of sizes and materials to suit many applications and conditions. Long leg sections make this sling particularly easy to fit.

Chain Slings are one of the most durable and robust types of rigging available. It is not uncommon to inspect chain slings that have been in service up to 40 years. Up to a few years ago the most common grade of alloy lifting chain used for crane chain slings was grade 80.

One of those pieces of equipment often utilized to lift these types of loads is the chain sling. These slings can be used in various industrial and construction applications. These slings are flexible, temperature resistant, and strong enough to handle a wide array of loading conditions.

Chain Sling Inspection Procedures

1. Clean each chain sling prior to inspection.
2. Check the identification tag legibility.
3. Measure the reach of sling legs to make sure they correspond to the values stamped on the chain sling identification tag.
4. Make a link-by-link inspection of the chain slings for:

every 3 months

every six months

Under the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), lifting equipment inspections should be carried out by competent persons. A competent person is someone who has the right experience and knowledge to thoroughly understand what they are looking for.

Grade 100 Alloy Steel Chain Like Grade 80 chain, Grade 100 chain is recommended by OSHA and ASME for overhead lifting applications and is most commonly used in sling assemblies. Other regulations can be found in ASTM A973 – Standard Specification for Grade 100 Alloy Steel Chain.

Grade 70 chain is about 20 percent stronger than Grade 43. It is made from a heat-treated carbon steel that is incredibly sturdy and durable. Grade 70 chain is also usually embossed with a number 7, 70, or 700 on each link. Grade 70 has a working load limit available between 3,150 to 15,800 lbs.

Grade 100 chain was specifically designed to for the rigorous requirements of overhead lifting applications. Grade 100 Chain is a Premium quality high strength alloy steel. Grade 100 Chain has a 20 percent increase in working load limit as compared to a similar size chain in Grade 80.

Hackett Grade 8 Chain Slings should not be in or near acidic or caustic solutions due to the risk of hydrogen embrittlement. Chain is designed to support a load in a straight line. Never tie knots in the chain and always make sure chain is free from twists before putting it under tension.