Hi everyone. I ran into an issue where my Display port wasn’t working after the computer went to sleep. After searching online and trying different fixes for 2+ hours, I finally came across a very simple way to fix this issue.

Please consider Subscribing if this video helped you out! Subs help my channel be able to monetize which allow me to produce additional content 🙂

Steps to fix the Display Port:
1. Turn off the computer and either unplug it from the power source or turn off via the Power Supply’s power switch.
2. Turn off your monitor and then unplug it from the power source.
3. Wait 30 seconds.
4. Plug the monitor back on, turn it on if it doesn’t do so automatically.
5. Plug the PC back on or flip the PSU switch back to on.
6. Turn the PC back on and if this fix is applicable, your Display Port will now work again.

NOTE: Make sure no other video cables are plugged in to the GTX 1080 or other GPU. Just have the faulty Display Port plugged in with the Display Port cable connected to the monitor.

Also, if you suspect driver issues, connect the computer via HDMI or DVI and reinstall the display drivers again. You may need to use older drivers if the newest drivers are breaking your ability to use Displayport.

I hope this saved you guys from all the effort and possible RMA’s!

Thanks for watching 🙂

#Displayport,#NoSignal,#Display

Please take the opportunity to connect and share this video with your friends and family if you find it useful.